Donkey Kong Forum
General Donkey Kong Discussion => General Donkey Kong Discussion => Topic started by: Redghost357 on June 13, 2018, 06:32:33 pm
-
So I bought a cheap $60 fightstick off of Amazon for my raspberry pi and the joystick feels nothing like the original DK joystick so I want to know if I can install a DK joystick into here. The pictures below hopefully help.
One issue that looks obvious is that the wires for each of the 4 clips only come in 2 and not 3 as the clips on the DK joystick appear to require 3 wires for each 3 connection pins per clip. So is the wiring still possible to hook up or is there’s not enough wires?
Also where can I get cheap refurbished DK sticks? I hear KLOV has em but I still am lost on their site whenever I try to find them.
-
It looks like those switches had 3 connections each at one point, but the normal closed connection has been removed. Switches only get 2 wires connected, even if there's 3 connections on the switch. Nintendo switches are the same configuration as those, you will connect to the same inputs - ground and normal open.
KLOV Parts FS section (you have to be a member to access):
https://forums.arcade-museum.com/forumdisplay.php?f=24