Author Topic: IMPORTANT: Possible incompatibity issue with DK Remix board  (Read 24562 times)

0 Members and 1 Guest are viewing this topic.

Offline Sock Master

  • Elite Member
  • *
  • Posts: 375
    • Awards
IMPORTANT: Possible incompatibity issue with DK Remix board
« on: January 11, 2016, 07:34:38 pm »
This just happened so I don't have full verification or details yet, but it's possible that there may be a compatibility issue if your DK PCB has a certain variant of the Z80 chip.

I don't know if this is common or rare yet.  I have investigating to do.

If you have a Z80 chip labelled "NEC D780C" on your DK PCB, the Remix board may not function correctly.

The solution most likely is to switch the Z80 with a different one.  My DK PCB has a "SHARP LH0080A Z80A-CPU"

Basically, I think anything that ends with an "A" will be fine.  A Z80 chip with a number ending with a "C" might not be.


If people can check their DK PCBs to see how common a "C" type chip is, I would be extremely grateful.  (especially anyone who's already waiting for their board to arrive)

If it's common, I'm going to maybe include a Z80A with each Remix board but it's going to delay things.


I'm sorry everyone.  I'm going to do everything I can to fix this.

"Badges? We ain't got no badges. We don't need no badges. I don't have to show you any stinkin' badges!"
Member for 8 Years snek Twitch Streamer

Offline Shnypz

  • Senior Member
  • *
  • Posts: 212
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #1 on: January 12, 2016, 06:26:15 am »
SHARP LH0080A Z80A-CPU over here
Member for 9 Years Blogger

Offline danman123456

  • Spring Jumper
  • *
  • Posts: 810
    • Twitch TV Stream
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #2 on: January 12, 2016, 11:51:52 am »
Yeah it was odd but looking here not sure there is a big difference. Both are 4Mhz. Hopefully its some issue with the Z80c vs a.

http://www.cpu-world.com/Compare/346/NEC_Z80_4_MHz_(D780C-1)_vs_Sharp_Z80_4_MHz_(LH0080AH).html

Dan
DK High : 1,059,700 (Lvl 22-1 KS!);
DK KS Speedrun : 1 Hr 16 Min 40 Sec - World Record!
DK Lvl 1 - 1: 12,400
Fix-It Felix Jr - 297,000 (World Record)
Fix-IT Felix Jr 1 Hour Limit - 177,000
Fix-It Felix Jr KS Speedrun - 1h33
Member for 11 Years DK 1M Point Scorer DK Killscreener CK Killscreener Blogger

Offline Sock Master

  • Elite Member
  • *
  • Posts: 375
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #3 on: January 12, 2016, 12:41:35 pm »
I found a piece of hardware that had an NEC D780C in it and pulled the chip out.
It does the same thing that was happening to you when I tried it in the DK Remix board.

So that's pretty definitive.  Something is different with the D780C, something about it's signal timing I suspect.

I'm trying hardware & firmware tests to see if I can find some sort of solution to make it work properly, but no success yet.  For now it seems this chip is simply not compatible with the DK Remix board.
« Last Edit: January 12, 2016, 04:10:34 pm by Sock Master »
"Badges? We ain't got no badges. We don't need no badges. I don't have to show you any stinkin' badges!"
Member for 8 Years snek Twitch Streamer

Offline f_symbols

  • Spring Jumper
  • *
  • Posts: 833
  • wht u mean
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #4 on: January 12, 2016, 03:11:44 pm »
I just checked all 3 of my pcbs, all acquired from different sources at different times, and they all have the z80a; it's likely that this will be a very isolated occurrence.
Member for 11 Years Former DK Remix World Record Holder DK Remix Killscreener DK 1M Point Scorer Blogger DK Killscreener Twitch Streamer

Offline Scoundrl

  • Elite Member
  • *
  • Posts: 343
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #5 on: January 12, 2016, 04:09:59 pm »
Manual specs z80a FWIW
Member for 11 Years Blogger Twitch Streamer

Offline Sock Master

  • Elite Member
  • *
  • Posts: 375
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #6 on: January 12, 2016, 04:17:35 pm »
It's probably something subtle as the C seems to work fine if I plug it into the DK board by itself.  I haven't been able to figure it out *yet*, but I have one to test now.

I ordered a few Z80A just in case someone will need one for/with their Remix board, but they probably won't arrive for a month.
"Badges? We ain't got no badges. We don't need no badges. I don't have to show you any stinkin' badges!"
Member for 8 Years snek Twitch Streamer

Offline CrazyKongFan

  • New Member
  • *
  • Posts: 8
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #7 on: January 12, 2016, 05:44:51 pm »
I've got 2 4-board PCB's. The one in my cocktail with the D2K board has a Sharp LH0080A, the spare one that partially works (CLK and VID boards both have issues, but the CPU board works fine) has an NEC Z80C. Looking at some of my other non-DK boards that use a Z80, there's mostly a mix of Sharp LH0080A's, NEC Z80C's and Zilog Z80A's. They probably used whatever they could get cheapest or was readily available when they were assembling boards.
Member for 11 Years CK Killscreener

Offline Simpsons99

  • Senior Member
  • *
  • Posts: 232
  • Brian *The Big Bird Hater * Allen
    • Simpsons99 Gaming
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #8 on: January 12, 2016, 07:12:16 pm »
I know  I have 2 DK Board sets .. One Needs a Z80 Replaced on it ..  The chips you have spoken of are not on Ebay .
Donkey Kong 880,500 Kill Screen
Donkey Kong Junior 1,073,800 Kill screen
Donkey Kong 3  1,596,000
Crazy Kong 566,600  Kill screen.

http://www.twitch.tv/simpsons99
You Tube: Simpsons99 Gaming
Discord: Simpsons99 Gaming
Member for 9 Years DK Masters - Rank D CK Killscreener DK Killscreener DKJR Killscreener Twitch Streamer

Offline tilt

  • Global Moderator
  • Elite Member
  • *
  • Posts: 304
  • Repair man of DKF
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #9 on: January 13, 2016, 12:51:23 pm »
My pcb has a Sharp Z80-A
My stream is currently (http://www.twitch.tv/expandedidea/)
PB(s):
Donkey Kong: 1,116,400 (KS)
Donkey kong Hard roms(prev. world record): 914,200
Crazy Kong: 513,700 (KS)
Member for 9 Years DK 1.1M Point Scorer snek DK 1M Point Scorer CK Killscreener DK Killscreener Blogger Twitch Streamer

Offline Gettysburg1863

  • Jr. Member
  • *
  • Posts: 44
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #10 on: January 13, 2016, 02:03:24 pm »
Mine has the SHARP .....A
Member for 8 Years DK Killscreener CK Killscreener Twitch Streamer

Offline danman123456

  • Spring Jumper
  • *
  • Posts: 810
    • Twitch TV Stream
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #11 on: January 13, 2016, 05:29:58 pm »
I know  I have 2 DK Board sets .. One Needs a Z80 Replaced on it ..  The chips you have spoken of are not on Ebay .

Brian I ordered a Sharp Z80A on Ebay for $9.99 + $2.50 shipping from a us seller. There are tons of them on eBay :)
DK High : 1,059,700 (Lvl 22-1 KS!);
DK KS Speedrun : 1 Hr 16 Min 40 Sec - World Record!
DK Lvl 1 - 1: 12,400
Fix-It Felix Jr - 297,000 (World Record)
Fix-IT Felix Jr 1 Hour Limit - 177,000
Fix-It Felix Jr KS Speedrun - 1h33
Member for 11 Years DK 1M Point Scorer DK Killscreener CK Killscreener Blogger

Offline Gettysburg1863

  • Jr. Member
  • *
  • Posts: 44
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #12 on: January 15, 2016, 01:32:16 pm »
My chip is installed (Remix only, no Deranged) and went in without a hitch, seated the entire way down. Works flawlessly. Thank you Sock, you rule!
Member for 8 Years DK Killscreener CK Killscreener Twitch Streamer

Offline ChrisP

  • Spring Jumper
  • *
  • Posts: 1763
  • I'm going to jump next to your leg.
    • Donkey Blog
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #13 on: January 15, 2016, 02:18:59 pm »
Uh oh, bad news for ChrisP!

I knew there was a reason I decided to hang back and wait for the second round of these!  ;D

Oh well, I'll pull out my Junior PCB, or my Popeye, and see if they'll work. :)
http://donkeykongblog.blogspot.com

4 Quarters :-* - 800K Avg. Per Qtr. :o - No Restarts 8) - No Proof :'(

7/26/2013   Coin 35,946   710,800   18-1
7/28/2013   Coin 35,947   903,700   22-1
8/16/2013   Coin 35,948   694,100   17-6
8/17/2013   Coin 35,949   893,100   22-1

3,201,700: the $1 World Record?
Member for 11 Years DKJR Killscreener DK Masters - Rank D Blogger Twitch Streamer DK Killscreener CK Killscreener

Offline f_symbols

  • Spring Jumper
  • *
  • Posts: 833
  • wht u mean
    • Awards
Re: IMPORTANT: Possible incompatibity issue with DK Remix board
« Reply #14 on: January 15, 2016, 08:49:30 pm »
omg dat mad face doe  <mad>
Member for 11 Years Former DK Remix World Record Holder DK Remix Killscreener DK 1M Point Scorer Blogger DK Killscreener Twitch Streamer